动态二氧化碳捕集与间歇式可再生电力转化方向博士研究员

PhD in Dynamic CO₂ Capture and Conversion with Intermittent Renewable Power

Eindhoven University of Technology (TU/e) · 荷兰 · Eindhoven

原帖优先:申请材料、截止时间与资格以原帖和学校官方说明为准。

AI 中文速览

研究内容
开发结合直接空气捕集与二氧化碳转化的电加热反应器,研究在波动的可再生电力供应下如何保持高效捕集、吸附剂再生与热量回收,并探索3D打印反应器结构、电阻或感应加热以及吸附剂再生与二氧化碳加氢的集成。
申请条件
原文未说明具体的学位背景、专业或成绩等硬性申请条件。
待遇
月薪为 3204 至 4051 欧元(EUR 3204 - 4051 per month)。
申请方式
原文未说明具体的申请方式、提交语言或截止日期的详细投递地址。

由 gemini-2.5-flash-lite 生成,博士岗判定置信度 100%。

岗位信息

截止
(Europe/Amsterdam) 剩 19 天
学科
化学工程
合同类型
雇佣合同
原文薪资
EUR 3,204–4,051 / 月(税前)
税后月薪(估)
¥19,000–¥24,000;房租后 ¥11,100–¥16,100
估算假设
单身、无子女、雇佣合同的粗略估算,以学校 offer 为准;扣除率 25%;汇率日期 2026-10-01
原帖发布
本站收录
内容更新
原帖导师候选(待核验)
Martin van Sint Annaland
来源
AcademicTransfer(荷兰学术招聘) · 最近核对 2026-11-22
详情核验
判定依据(原文摘录)
  • 这是一个博士培养机会
    This PhD position focuses on designing and operating electrified, structured packed-bed reactors for direct air capture and integrated CO₂ conversion under changing renewable power availability.
原文

Can you help turn CO₂ from the air into a renewable carbon resource? Join us to develop electrically heated reactors that combine direct air capture with CO₂ conversion—and work effectively with a fluctuating renewable electricity supply.

Information Europe’s ambition for a fossil-fuel-free chemical industry calls for new ways to produce chemicals and fuels from circular carbon and green hydrogen. Renewable electricity creates exciting opportunities for electrification, but its intermittency challenges conventional process design. Within CO2URAGE, universities and industrial partners will develop intensified, electrified processes to produce syngas, methane, or methanol from CO₂ captured from air, biomass, or other circular sources.

This PhD position focuses on designing and operating electrified, structured packed-bed reactors for direct air capture and integrated CO₂ conversion under changing renewable power availability. Your central challenge is to maintain efficient capture, sorbent regeneration, and heat recovery as the available electrical power varies. Capturing CO₂ from air requires processing large air volumes, while regenerating the sorbent requires efficient heat supply. How can we design compact reactors that combine low pressure drop, rapid heating and cooling, and effective heat recovery?

You will investigate how 3D-printed reactor structures and resistive or inductive heating can improve heat management and reduce the electricity required to release captured CO₂. You will then explore the integration of sorbent regeneration with CO₂ hydrogenation to methane or syngas. Combining capture and conversion offers opportunities to use reaction heat, simplify processing, and improve overall energy efficiency.

You will combine reactor modeling and laboratory experiments to: • Design and test 3D-printed, electrically heated reactors for direct air capture. • Optimize capture cycles and heat recovery under fluctuating electricity supply and ambient conditions. • Explore integrated CO₂ capture and hydrogenation through modelling and proof-of-concept experiments.

The central scientific challenge is to understand how reactor structure, local heat supply and dynamic operation interact—and use that understanding to design energy-efficient capture and conversion processes.

You will pursue your PhD at Eindhoven University of Technology under the supervision of Prof. Martin van Sint Annaland. Within CO2URAGE’s work package Electrification of Direct Air Capture and Conversion, you will collaborate with researchers at the University of Twente and Delft University of Technology, as well as industrial partners. Your reactor research will connect directly with program activities in process control, system integration, and techno-economic and environmental assessment.

信息有误?提交纠错