微丝放电加工混合建模博士研究员(MSCA全资资助)
PhD Vacancy (DC11_microwireEDM): Hybrid modelling of micro-wire EDM for deterministic micromanufacturing of medical micro-surgical instruments
原帖优先:申请材料、截止时间与资格以原帖和学校官方说明为准。
AI 中文速览
- 研究内容
- 本项目旨在研究面向医疗微型手术器械的确定性微丝放电加工(micro-wire EDM),开发结合物理模型与数据驱动替代模型的混合建模链,以预测加工条件对最终零件质量、尺寸精度和表面完整性的影响,并实现过程异常的早期检测。
- 申请条件
- 申请者须持有机械、制造、材料、机电或生物医学工程(或紧密相关学科)的硕士学位(或即将完成),具备出色的英语听说读写能力,且尚未获得博士学位;同时要求对精密和微型制造、数值建模(如FEM)、数据驱动建模与编程(如Python)有强烈的兴趣和相关经验。
- 待遇
- 提供为期36个月的全职固定期限博士雇佣合同。薪酬根据MSCA博士网络规则及意大利国家法律发放,总毛薪酬约为163,000欧元(含3年期生活津贴与交通津贴,约合生活津贴每月4,000欧元(需经国家系数修正)及交通津贴每月710欧元,若符合条件可另享家庭津贴)。
- 申请方式
- 申请者须通过指定的Google表单链接填写问卷,并将所有申请材料合并为一个PDF文件(命名规则:name1.name2_surname1.surname2.pdf)通过电子邮件提交或按要求上传。
- 材料清单
- 1页A4纸的动机信(Motivation letter)
- 详细简历(含教育背景、当前职位、工作经历、课外活动、国际经历及相关项目经验)
- 发表论文列表(如有,含DOI,不包含论文PDF)
- 学士与硕士学位证书及文凭补充件复印件
- 学士与硕士成绩单(若硕士未毕业,须包含已获学分、成绩及下学期课程列表)
由 gemini-2.5-flash-lite 生成,博士岗判定置信度 100%。
岗位信息
- 截止
- 参见原文(截止时间尚未核验)
- 学科
- 工程
- 合同类型
- 雇佣合同
- 本站收录
- 内容更新
- 来源
- EURAXESS(欧洲科研人才门户,MSCA 官方导出) · 最近核对 2026-11-22
- 详情核验
判定依据(原文摘录)
- is_phd
Università di Pisa (UniPi) seeks a highly motivated PhD candidate for a fully funded international doctoral position within the Marie Skłodowska-Curie Doctoral Network (MSCA-DN)
- english_ok
• D.1 Excellent English, spoken and written (TOEFL or IELTS score, if available).
- bachelor_ok
Requirements / required education level / degree: Master Degree or equivalent
官方导出原文
Offer Description Università di Pisa (UniPi) seeks a highly motivated PhD candidate for a fully funded international doctoral position within the Marie Skłodowska-Curie Doctoral Network (MSCA-DN), project MicroMan4Health: Data-Centric Micromanufacturing Platform Towards Added Value in the Health Sector (www.microman4health.eu). The shift from process-centric to data-centric micromanufacturing constitutes a paradigm evolution in how knowledge, control and value are created in micromanufacturing platforms for the health sector. About the Host Università di Pisa is a leading Italian university where thousands of students are educated each year across a wide range of scientific and technological disciplines. UniPi has always aimed at the quality and innovation of teaching and research by developing a fruitful relationship with the economic and industrial sectors. The Department of Civil and Industrial Engineering (DICI) provides full education in the field of advanced manufacturing processes and smart manufacturing systems. The DICI laboratories are equipped with state-of-the-art manufacturing facilities, including sink EDM, SEM and metallographic preparation, surface metrology, and various additive manufacturing technologies (metal and non-metal). UniPi is in Tuscany, a dynamic region with a strong industrial and technological ecosystem and a wonderful work-life balance. Research Background & Focus Research Background: Micro-surgical instruments and miniature metallic components for minimally invasive devices require sub-100 µm dimensional accuracy, stable surface integrity and compliance with stringent certification requirements. Micro-wire EDM is one of the few processes capable of shaping hard metallic materials at this scale, but its behaviour is governed by stochastic discharge phenomena and is still described largely through empirical relations. Machining, in-line monitoring and metrology data are generated along the process chain but rarely integrated, so deviations affecting quality or robustness are detected only after the fact. Research Focus: The research addresses the challenge of achieving deterministic and reliable micro-wire EDM manufacturing for medical micro-surgical instruments, where small variations in discharge behaviour, wire–workpiece interaction and thermal effects can significantly affect dimensional accuracy and surface integrity. The project aims to bridge process physics, real-time monitoring and data-driven modelling to understand and predict how machining conditions translate into final component quality. A central challenge is to transform process and metrology data into actionable knowledge, enabling early detection of instabilities and more accurate, adaptive control of micromanufacturing processes. Research Objectives: The doctoral project aims to develop an integrated modelling framework able to predict product performance in micro-wire EDM, starting from a multiscale and micro-physical analysis of the process. High-fidelity physical models will be combined with reduced-order, data-driven surrogate models describing subprocesses for which experimental data exist, but deterministic knowledge is still incomplete, with the objective of progressively replacing empirical formulations with physics-informed ones as new insights emerge. Key Objectives & Acquired Competences • Construction of a hybrid modelling chain coupling physics-based discharge modelling with data-driven predictors, capturing wire wear, discharge dynamics and heat-affected zones and their causal impact on final component features. • Integration of machining, in-line monitoring, metrology and testing data into early R&D and design workflows through advanced data analytics and validated simulation environments. • Development of a structured process–product data-management architecture enabling traceability, knowledge extraction and early-warning indicators for deviations affecting quality or robustness. • Assessment of advanced materials and wire configurations (coated wires, high-tensile alloys, optimised dielectric fluids) to improve cutting stability, surface integrity and dimensional accuracy. • Establishment of a real–virtual testing bench combining in-situ monitoring, digital twins and model-based quality assessment, with AI-supported analytics processing monitoring signals and providing real-time feedback for model updating. • Benchmarking process parameters, quality metrics and sustainability indicators to ensure cross-validation of the modelling approaches.
Expected Results & KPIs • A validated workflow integrating machining data, in-situ monitoring signals and metrology outputs into a unified knowledge base (data ingestion completeness above 90%; at least 20% reduction in manual data-processing effort). • A software prototype implementing hybrid physics-based and data-driven models (prediction accuracy of at least 80% for dimensional accuracy and surface roughness; computational runtime reduced by at least 30% with respect to full physical simulations). • Predictive models for machining outcomes and early detection of process anomalies (early-warning detection rate of at least 75%; process repeatability improved by at least 20%; scrap rate reduced by at least 15% in controlled validation tests). • Quantified and experimentally validated surface-integrity descriptors, including microstructural alterations and recast-layer metrics (recast-layer thickness variability within ±10% across repeated runs; tolerance windows compatible with ISO 13485 and medical device requirements). • Evidence-based knowledge on advanced wire materials, coatings and dielectric conditions (cutting stability or MRR improved by at least 15% for at least one advanced configuration; wire wear or breakage frequency reduced by at least 20%).
Validation, Industrial Relevance & Secondments Industrial Relevance: The project combines the long-standing expertise of Università di Pisa in electrical discharge machining (discharge modelling, process monitoring, optimisation strategies and innovative dielectric-fluid formulations), with the requirements of industrial and academic partners of the network. Secondments & Research Mobility: Three secondments are planned, with a primary focus on the industrial experience at MMIMicro (3 months), where the researcher will work on the definition of tolerances and functional constraints for micro-components used in robotic micro-surgical assemblies, evaluate prototype parts and micro-metrology tools, and validate the proposed monitoring approach on industrial equipment. A complementary secondment at KU Leuven (2 months) will support benchmarking against the activities of DC5 and the development of shared guidelines for assessing hybrid modelling approaches. Finally, Politecnico di Milano (1 month) will provide expertise in advanced simulation and CAM for micro-milling, enabling a direct benchmark between micro-wire EDM and micro-milling.
Requirements / required education level / degree: Master Degree or equivalent
Requirements / required education level / discipline: Engineering
Requirements / required education level / degree: Master Degree or equivalent
Requirements / required education level / discipline: Engineering
Requirements / required education level / degree: Master Degree or equivalent
Requirements / required education level / discipline: Engineering
Requirements / required education level / degree: Master Degree or equivalent
Requirements / required education level / discipline: Engineering
Requirements / skills: B. Technical Skills • B.1 Strong interest and hands-on experience in precision and micro-manufacturing, ideally including non-conventional processes such as EDM or micro-wire EDM. • B.2 Experience in physics-based and numerical modelling (FEM, thermal or multiphysics simulation) and interest in reduced-order or surrogate modelling. • B.3 Hands-on experience in data-driven modelling, machine learning, digital-twin concepts and programming (e.g. Python or similar). • B.4 Experience with experimental setups, laboratory and measurement equipment, process monitoring and signal acquisition. • B.5 Familiarity with surface and microstructural characterisation (surface topography, SEM, metallographic analysis, recast layer assessment) is an asset. • B.6 Practical knowledge of design of experiments (DoE), statistical analysis and scientific presentation. • B.7 Awareness of data management, traceability and medical-device quality frameworks (e.g. ISO 13485) is an asset.
C. Research Focus & Motivation • C.1 Strong interest in deterministic micromanufacturing, hybrid physics- and data-driven modelling, and high-precision micro-manufacturing in an industrial, MedTech-oriented context. • C.2 Motivation to conduct independent doctoral research, while enrolled in the PhD programme at UniPi and meeting its requirements in a multidisciplinary international team, including hands-on experimental work, the mandatory international secondments and the management of laboratory service activities. • C.3 Motivation to publish research findings in international journals, present results at conferences and fulfil project deliverables.
D. Communication & Language Skills • D.1 Excellent English, spoken and written (TOEFL or IELTS score, if available). • D.2 Ability to communicate research results clearly, both in writing and verbally. • D.3 Readiness to contribute to project activities, training events and dissemination efforts.
Requirements / required languages / language: ENGLISH
Requirements / required languages / language level: Excellent
Research experience / main research field: Engineering
Research experience / research sub field: Microengineering
Research experience / years of research experience: None
Research experience / main research field: Engineering
Research experience / research sub field: Biomedical engineering
Research experience / years of research experience: None
Research experience / main research field: Engineering
Research experience / research sub field: Mechanical engineering
Research experience / years of research experience: None
Research experience / main research field: Engineering
Research experience / research sub field: Industrial engineering
Research experience / years of research experience: None
Additional information / benefits: Contract type: According to national legislation and MSCA Doctoral Networks requirements. Remuneration: According to the Grant Agreement of the project, the total gross amount including salaries, social security contributions, taxes and other costs included in the remuneration under the employment contract for the doctoral candidate is approximately EUR 163,000 (living + mobility allowance) over the three-year period (total gross cost to the Administration).
The monthly gross salary will comprise a living allowance (approximately € 4,000/month, to be corrected with the country factor of the recruiting institution), mobility allowance (€ 710/month) and if applicable a family allowance (€ 660/month) and if applicable other allowances according to Grant Agreement of Project MicroMan4Health.
The family allowance and any other applicable allowances will be granted if the doctoral candidate meets the eligibility requirements set out in the Grant Agreement.
Additional information / eligibility criteria: A. Education & MSCA Eligibility • A.1 You do not yet hold a doctoral degree. • A.2 You hold, or will shortly complete, a Master's degree in mechanical, manufacturing, materials, mechatronic or biomedical engineering, or a closely related discipline, with very good results, qualifying you for admission to a doctoral programme. Candidates must have a master's degree or a similar degree with an equivalent academic level in mechanical, manufacturing, materials, mechatronic or biomedical engineering, or a closely related discipline (or equivalent), master’s degree that gives access to a PhD program in the country where it was obtained and meets the admission requirements of the PHD program of the university for this position. • A.3 As per MSCA Doctoral Network Guide for Applicants the Doctoral Candidate can not be in the possession of a doctoral degree at the date of recruitment. Researchers who have successfully defended their doctoral thesis but who have not yet formally been awarded the doctoral degree will not be considered eligible. • A.4 As per MSCA Doctoral Network Guide for Applicants: Mobility rule: Doctoral candidates must not have resided or carried out their main activity (work, studies, etc.) in the country of the recruiting beneficiary (Italy) for more than 12 months in the 36 months immediately prior to date of recruitment.
Approval and Enrollment in the PhD Programme
The activation of the Phd position is subject to academic approval by the University, to be made after the end of the selection process. The candidate will be enrolled in one of the PhD programmes (Smart Industry) at the Department of Information Engineering of University of Pisa, under the supervision of prof. Gualtiero Fantoni.
Additional information / selection process: For the selection procedure, the consortium has appointed a Committee, consisting of 3 members as listed below: • Professor Gualtiero Fantoni, University of Pisa • Professor Krishna Kumar Saxena, KU Leuven • Professor Matteo Calaon, DTU, Denmark or Professor Massimiliano Pietro Giovanni Annoni, Politecnico di Milano
The selection is assessed by qualifications and an interview. The total rating allowed is 100/100. Qualifications and publications will be assigned up to 60 points, with a minimum passing rate of 36/60. The interview will be assigned up to 40 points, with a minimum passing rate of 24/40. The final ranking list will be compiled considering both ratings.
The interview, reserved only to applicants passing the qualification rate, will be held at the University of Pisa, Department of Civil and Industrial Engineering, Largo Lucio Lazzarino 2, Pisa, Italy. Candidates unable to attend the interview at the University of Pisa will be allowed to be interviewed via web or conference call. The Selection committee is appointed to establish the duly examination of the candidates and shall acquire each candidate’s copy of an identity card or passport.
Additional information / comment: What We Offer • Funded full-time doctoral position within an international, application-oriented research network, with structured doctoral training and individual career development. • Competitive remuneration package provided according to the MSCA Doctoral Network rules. • Duration: fixed-term for the funded doctoral project, 36 months. • International academic and industrial experience through three secondments. • Participation in the MicroMan4Health doctoral training programme (approximately 12 weeks over three years) at different European locations. • Guidance by university and industry experts, with access to advanced laboratory infrastructure and state-of-the-art non-conventional machining equipment. • Opportunities to network and present research results at international conferences.
How to Apply • Click on the link https://docs.google.com/forms/d/e/1FAIpQLSd1SZB2dvAVEt3zHAczYlnHZHr-JMyv0fQnfO58EEpdqF9Xxw/viewform?usp=header complete the questionnaire, send the following materials in a single PDF file combining all application documents, using the naming syntax: name1.name2_surname1.surname2.pdf. The PDF file should include: • Motivation letter (1 A4 page). • Detailed CV including education, current position, work experience (if any), extracurricular activities, international experiences, and projects demonstrating your interests, technical, programming and software skills relevant to the project. • List of publications with DOIs, if applicable (do not include the PDFs of the publications). • Copies of BSc and MSc diplomas with diploma supplements. • Transcripts of records for BSc and MSc (if the Master's degree is not yet completed, include the credits and scores obtained so far and the course list of the upcoming semester).
Work location / nr job positions: 1
Work location / job organisation institute: University of Pisa
Work location / job country: Italy
Work location / job state province: PI
Work location / job city: PISA
Work location / job postal code: 56121
Work location / job street: Largo Lucio Lazzarino 2
Hiring contact / organisation institute: University of Pisa
Hiring contact / organisation institute type: Higher Education Institute
Hiring contact / division faculty: Department of Civil and Industrial Engineering
Hiring contact / country: Italy
Hiring contact / city: Pisa
Hiring contact / state province: Italy
Hiring contact / postal code: 56126
Hiring contact / street: Lungarno Pacinotti, 43
Hiring contact / e mail: gualtiero.fantoni@unipi.it
Hiring contact / website: http://www.unipi.it
Hiring contact / phone: 056440
Application / how to apply: e-mail
Application / application email: michele.abruzzo@ing.unipi.it
EU funding / framework programme: Horizon Europe - MSCA
EU funding / cofund nr job position: 1
EU funding / sesam agreement number: 101312169
Research field / main research field: Engineering
Research field / sub research field: Industrial engineering
Research field / main research field: Engineering
Research field / sub research field: Biomedical engineering
Research field / main research field: Engineering
Research field / sub research field: Microengineering
Research field / main research field: Engineering
Research field / sub research field: Mechanical engineering
Researcher profile: First Stage Researcher (R1)
Positions: PhD Positions
Contract: Temporary
Job status: Full-time
Application deadline (as exported; timezone unverified): 2026-11-26T22:59:59