面向生物工程骨骼肌移植物成熟的模块化生物反应器平台博士研究员

MSCA Doctoral Network BioMuscle DC11 – Modular bioreactor platform for the maturation of bioengineered skeletal muscle grafts

EBERS Medical Technology · 西班牙

原帖优先:申请材料、截止时间与资格以原帖和学校官方说明为准。

AI 中文速览

研究内容
本项目旨在开发一个多功能、模块化的生物反应器平台,能够对不同尺寸和几何形状的生物工程骨骼肌构建物施加受控的机械和电刺激。研究将涵盖自适应培养腔和刺激配置的开发、机电刺激系统的集成,以及监测和控制功能的实现,以确保可靠、可重复的培养条件。初始生物学验证将在萨拉戈萨大学合作进行,随后在鲁汶大学、伦敦大学学院和帕多瓦大学进行国际合作实验。
申请条件
申请者需持有工程学等相关领域的学士学位(或具备同等学历),且硕士/或同等学历背景(如生物医学工程、生物工程、生物技术、组织工程、机械工程、电气工程或密切相关的学科),且尚未获得博士学位。申请者在招聘日前3年内不得在宿主机构所在国家居住或主要活动超过12个月。申请者须具备高水平的书面和口语英语能力。
待遇
录用者将根据MSCA博士研究员条例获得优厚的薪资,确切的(净)薪资将在任命时根据当地税收法规和生活成本校正系数确认。薪资包括生活津贴、流动津贴和家庭津贴(如适用)。有保障的博士资助期限为36个月。
申请方式
申请人须在2027年1月15日之前将申请材料通过电子邮件发送至 pfernandez@ebersmedical.com,邮件主题注明“BioMuscle – DC11 PhD Application – [Full Name]”。所有合格的申请将由相应的监督团队进行审查,最优秀的候选人将被邀请进行视频会议面试。
材料清单
  • 详细简历(Europass模型)
  • 动机信(最多2页),突出研究经历、学术成就、对BioMuscle及选定研究项目的兴趣,明确说明获得硕士学位至2027年1月期间拥有的“同等研究经验”月数及过去3年居住超过12个月的国家,若申请多个职位需按偏好排序(最多申请3个)
  • 最多两封前导师的推荐信(可选)
  • 学士和硕士学位成绩单(如有需要,附英文翻译),须显示考试期间取得的成绩以及如尚未授予学位则证明将在预计招募时间前获得该学位的证据

由 gemini-2.5-flash-lite 生成,博士岗判定置信度 100%。

岗位信息

截止
参见原文(截止时间尚未核验)
学科
材料科学
合同类型
雇佣合同
本站收录
内容更新
原帖导师候选(待核验)
Pedro Moreo, Iñaki Ochoa
来源
EURAXESS(欧洲科研人才门户,MSCA 官方导出) · 最近核对 2026-11-22
详情核验
判定依据(原文摘录)
  • is_phd为true
    The doctoral researcher will enrol in a relevant PhD programme at the University of Zaragoza
  • english_ok为true
    Applicant demonstrates a high level of proficiency in written and spoken English, which will be assessed with the motivation letter and the interview, respectively.
  • bachelor_ok为true
    Requirements / required education level / degree: Bachelor Degree or equivalent
官方导出原文

Objectives of specific position 1. Develop a versatile and modular bioreactor platform capable of delivering controlled mechanical and electrical stimulation to bioengineered skeletal muscle constructs of different sizes and geometries. 2. Integrate advanced culture monitoring and control functionalities, including real-time monitoring of relevant environmental and stimulation parameters, together with semi automated operation to improve experimental reproducibility and usability. 3. Experimentally validate and optimise the bioreactor platform using different engineered skeletal muscle models, through preliminary studies in Zaragoza and subsequent collaborative experiments at KU Leuven, University College London and the University of Padua. Narrative description The development of functional bioengineered skeletal muscle grafts requires not only suitable cells and scaffolds, but also controlled culture environments capable of promoting tissue maturation and functional organisation. Mechanical and electrical stimulation play an important role in skeletal muscle development and may help improve the structural and functional properties of engineered muscle constructs. Within the BioMuscle Doctoral Network, DC11 will contribute to the development of a modular bioreactor platform specifically designed for the maturation of bioengineered skeletal muscle grafts intended for abdominal wall reconstruction. The doctoral researcher will work at the interface of biomedical engineering, tissue engineering and experimental biology, contributing to the design, development, optimisation and biological validation of the bioreactor platform. The research will include the development of adaptable culture chambers and stimulation configurations suitable for different tissue geometries and experimental requirements; the integration of mechanical and electrical stimulation systems; and the implementation of monitoring and control functionalities to ensure reliable, reproducible culture conditions. Working alongside EBERS' multidisciplinary engineering team, the researcher will participate in the development and experimental characterisation of the platform. Initial biological validation studies will be conducted in collaboration with the University of Zaragoza, allowing the researcher to investigate stimulation protocols and assess their effects on engineered muscle constructs. Subsequently, the platform will be evaluated in collaboration with international BioMuscle partners using different approaches to skeletal muscle bioengineering, including perfusion recellularised constructs, micro-injected constructs and neuromuscular organoid-based models. The project offers a unique opportunity to combine industrial medical technology development with cutting-edge research in skeletal muscle tissue engineering, gaining hands-on experience in both engineering and biological experimentation within an international doctoral training network. Expected results The project is expected to deliver: • A functional, modular and adaptable bioreactor platform for the mechanical and electrical stimulation of engineered skeletal muscle constructs. • Integrated monitoring and control functionalities supporting precise, reproducible and semi-automated culture conditions. • Experimentally optimised stimulation and culture protocols for different skeletal muscle tissue engineering approaches. • Validation data demonstrating the platform's suitability for supporting the maturation and functional characterisation of bioengineered skeletal muscle constructs. • Scientific contributions supporting the standardisation and scalability of skeletal muscle graft maturation technologies. Enrolment in Doctoral School University of Zaragoza (UNIZAR), Spain The doctoral researcher will enrol in a relevant PhD programme at the University of Zaragoza, subject to the university's admission requirements, and participate in the scientific and transferable-skills training activities organised by the BioMuscle Doctoral Network. Planned secondments • KU Leuven (Belgium), M32–M34: Investigation of the maturation of perfusion recellularised skeletal muscle constructs using the developed bioreactor platform, under the supervision of Prof. Thorrez.

• University College London (United Kingdom), M35–M37: Evaluation of the maturation of micro-injected skeletal muscle constructs, under the supervision of Prof. De Coppi. • University of Padua (Italy), M38–M40: Investigation of the maturation of neuromuscular organoid-based muscle constructs, under the supervision of Prof. Urciuolo. Secondment timing refers to the indicative project schedule and will be coordinated with the doctoral researcher's individual training plan.

Requirements / required education level / degree: Bachelor Degree or equivalent

Requirements / required education level / discipline: Engineering

Requirements / skills: • Applicant holds a MSc or equivalent degree in Biomedical Engineering, Bioengineering, Biotechnology, Tissue Engineering, Mechanical Engineering, Electrical Engineering, or a closely related discipline. • Applicant does not hold a PhD degree. Experience in one or more of the following areas will be considered an advantage: • Tissue engineering, regenerative medicine, biomaterials or biofabrication. • Mammalian cell culture, particularly 3D cultures or skeletal muscle models. • Biological characterisation techniques, including microscopy, viability assays and functional tissue assessment. • Design and development of bioreactors, cell culture systems or laboratory instrumentation. • Mechanical and/or electrical stimulation of biological tissues. • Mechanical design, CAD, sensors, control systems or automation. • Programming, experimental data analysis or computational modelling. • Interdisciplinary research combining engineering and life sciences. Candidates are not expected to have expertise in all these areas. Applicants with outstanding potential and strong backgrounds in either engineering or biological sciences, together with a clear motivation to acquire complementary skills, are strongly encouraged to apply. Candidates are not expected to have expertise in all these areas . Applicants with outstanding potential and strong backgrounds in either engineering or biological sciences, together with a clear motivation to acquire complementary skills, are strongly encouraged to apply.

Requirements / specific requirements: • Applicant did not reside or carry out his/her main activity (work, studies, etc.) in the country of the host organisation for more than 12 months in the 3 years immediately before the recruitment date. Compulsory national service, short stays such as holidays, and time spent as part of a procedure for obtaining refugee status are not considered. • Applicant demonstrates a high level of proficiency in written and spoken English, which will be assessed with the motivation letter and the interview, respectively. • Strong academic background and demonstrated aptitude for scientific research. • Solid foundations in at least one area relevant to the project, such as tissue engineering, cell culture, biomaterials, biomechanical systems, instrumentation, or bioreactor technologies. • Strong analytical and problem-solving skills, intellectual curiosity, and motivation to conduct interdisciplinary research at the interface of engineering and biology. • Ability to work independently and collaboratively in a multidisciplinary and international environment.

Requirements / required languages / language: ENGLISH

Requirements / required languages / language level: Excellent

Additional information / benefits: The selected candidates will receive an attractive salary in accordance with the MSCA regulations for Doctoral Researchers. The exact (net) salary will be confirmed upon appointment and is dependent on local tax regulations and on the country correction factor (to allow for the difference in cost of living in different EU Member States). The salary includes a living allowance, a mobility allowance, and a family allowance (if applicable). The guaranteed PhD funding is for 36 months.

Additional information / selection process: Candidates have to provide the following documents before 15th of January 2027 by e-mail to pfernandez@ebersmedical.com, indicating “BioMuscle – DC11 PhD Application – [Full Name]” in the subject line. • A detailed CV (Europass model) • A motivation letter (max 2 pages) highlighting your research experience, academic achievements and reasoning your interest in BioMuscle and selected research projects. Clearly indicate how many months of “equivalent research experience” you have / will have in the period between obtaining your MSc and January 2027 and in which countries you have resided during the last 3 years for more than 12 months. If you are applying for multiple positions within BioMuscle, rank the positions based on preference. You can apply for a maximum of 3 positions within BioMuscle. • Optionally, max two letters of reference from former mentors • Transcripts of bachelor and master’s degree (with translation to English, if needed). These documents must show the grades attained in exam periods, when applicable, and evidence that the required degree will be obtained by the expected time of recruitment if it has not already been awarded. All eligible applications will be reviewed by the corresponding supervisory team and the best candidates will be invited for a videoconference interview. All candidates will be interviewed firstly by the recruitment committee in an online call. After the interviewing round, the supervisory teams will shortlist 2 to 3 applicants for each position who will be invited for the BioMuscle in person recruitment event end of February 2027 in Kortrijk, Belgium (videoconferencing option will be available for those unable to attend in person). Final ranking of applicants will be made by the recruitment committee and all candidates will be informed on the final decision within one week after the recruitment event. Please note, the final appointment of the selected DCs will be subject to approval by the Doctoral School at the host institution where the candidate is enrolled.

Additional information / comment: About BioMuscle The abdominal muscles play a vital role in stabilising the torso, protecting internal organs, and controlling intra-abdominal pressure. Yet, they are highly susceptible to herniation, leading to more than 300,000 surgical repairs each year in Europe alone. Synthetic meshes used to reinforce the abdominal wall frequently fail to integrate with the body, causing complications and recurrence rates of up to 45%, and are contra-indicated for complex defects. This creates an urgent medical need for regenerative solutions that restore both the strength and the natural function of the abdominal wall. Bioengineered muscle grafts offer a promising alternative. By using decellularised muscle matrices repopulated with a patient’s own cells, these constructs have the potential to regenerate tissue and lead to functional repair. However, key challenges including scalable cell production, homogenous cell distribution, controlled maturation, and regulatory readiness must be overcome before this technology can reach patients. BioMuscle brings together leading European academic, clinical, and industrial partners to address these challenges and train 13 doctoral candidates in a uniquely interdisciplinary environment. The network integrates expertise in bioprocess development for cell expansion, recellularisation and maturation strategies to generate functional muscle grafts, preclinical testing with a focus on immune-driven outcomes, and computational modelling to predict graft behaviour. Furthermore, mechanical and electrical engineering will support automation and upscaling, while dedicated research in bioethics and medico-legal frameworks will map societal expectations and define pathways for advanced therapy medicinal product approval. Through this holistic programme, BioMuscle will equip a new generation of researchers with cutting-edge scientific and transferable skills, preparing them for diverse careers and accelerating the clinical translation of bioengineered muscles. PhD project information Host institution: EBERS Medical Technology S.L. Country: Spain Supervisory team: - Main supervisor: Pedro Moreo, EBERS Medical Technology S.L. - Academic supervisor: Iñaki Ochoa, University of Zaragoza For informal enquiries regarding the project, please contact: pmoreo@ebersmedical.com

Work location / nr job positions: 1

Work location / job organisation institute: EBERS Medical Technology

Work location / job country: Spain

Hiring contact / organisation institute: Ebers Medical

Hiring contact / organisation institute type: Small Medium Enterprise, Start-up

Hiring contact / country: Spain

Hiring contact / city: Zaragoza

Hiring contact / state province: Zaragoza

Hiring contact / postal code: 50016

Hiring contact / street: Polígono Malpica. Calle F Oeste Grupo Gregorio Quejido, nave 63.

Hiring contact / website: https://ebersmedical.com/index.php?option=com_content&view=featured&Itemid=101

Application / how to apply: e-mail

Application / application email: pfernandez@ebersmedical.com

EU funding / framework programme: Horizon Europe - MSCA

EU funding / cofund nr job position: 1

Research field / main research field: Biological sciences

Research field / sub research field: Biological engineering

Researcher profile: First Stage Researcher (R1)

Positions: PhD Positions

Contract: Other

Job status: Full-time

Application deadline (as exported; timezone unverified): 2027-01-14T23:00:00

信息有误?提交纠错