被动相变热控技术用于空间钙钛矿太阳能电池博士研究员

PhD Studentship: Passive Phase Change Thermal Control for Perovskite Solar Cells in Space

The University of East Anglia · 英国 · Norwich

原帖优先:申请材料、截止时间与资格以原帖和学校官方说明为准。

AI 中文速览

研究内容
本项目旨在研究被动相变材料(PCM)能否填补空间钙钛矿太阳能电池(PSCs)热控技术的空白,通过吸收和释放潜热将电池温度维持在安全范围内。研究内容包括建立和验证PSC-PCM叠层瞬态模型、与PCM Products Ltd合作配制高电导率PCM复合材料,以及应用机器学习代理优化权衡热缓冲与质量。原型将在UEA的真空和气候舱中在模拟太阳载荷下进行表征,并通过Space East的行业网络进行飞行代表性热真空鉴定。
申请条件
申请者通常需持有机械工程、航空航天工程、能源工程、应用物理学或材料科学专业的2:1或更高学位。
待遇
提供3年的英国“本土”学费及年度生活补助,当前UEA博士生奖学金标准为每年20,409英镑,并将根据2027/28年度商定的通胀率进行调整。
申请方式
原文未说明具体的申请方式与截止提交的网址细节,申请需在2027年2月24日前完成,入学时间为2027年10月1日。

由 gemini-2.5-flash-lite 生成,博士岗判定置信度 100%。

岗位信息

截止
(Europe/London) 剩 93 天
学科
能源
合同类型
雇佣合同
原文薪资
GBP 20,409 / 年(税前)
税后月薪(估)
¥12,800;房租后 ¥4,500
估算假设
单身、无子女、雇佣合同的粗略估算,以学校 offer 为准;扣除率 18%;汇率日期 2026-10-01
原帖发布
本站收录
内容更新
原帖导师候选(待核验)
Dr Mohammad Arqam
来源
jobs.ac.uk(英国博士项目及学术招聘) · 最近核对 2026-11-22
详情核验
判定依据(原文摘录)
  • is_phd
    PhD Studentship: Passive Phase Change Thermal Control for Perovskite Solar Cells in Space
  • english_ok
    You will develop the underpinning heat‑transfer science.
  • bachelor_ok
    The standard minimum entry requirement is 2:1 in Mechanical Engineering, Aerospace Engineering, Energy Engineering, Applied Physics, or Materials Science.
原文

Primary Supervisor: Dr Mohammad Arqam

Perovskite solar cells (PSCs) are an emerging photovoltaic technology with exceptional power‑to‑weight ratios, making them ideal for small satellites and deep‑space missions where size, weight and power (SWaP) are critical. However, their extreme sensitivity to thermal cycling in Low Earth Orbit (LEO), where temperatures range from -150 °C to +150 °C, causes rapid degradation and limits lifespan. Existing spacecraft employ conventional thermal strategies, including passive measures such as multi‑layer insulation (MLI), coatings and radiators, as well as active systems like pumped fluid loops and thermoelectric coolers. While effective for large satellites, these are too rigid, heavy or power‑intensive for CubeSats, and none are tailored to PSC vulnerabilities.

This project asks whether a passive phase‑change material (PCM) can close that gap. By absorbing and releasing latent heat across its melt transition, a PCM could hold cell temperature within a safe operating window (below ~60 °C) without power, pumps or moving parts. PCMs already buffer spacecraft electronics, but have never been co‑designed with a photovoltaic cell, and their transient behaviour in vacuum, where buoyancy‑driven melt convection is absent and heat transfer becomes conduction‑limited, remains uncharacterised.

You will develop the underpinning heat‑transfer science. In UEA’s Thermofluids and Solar Energy laboratories you will build and validate transient models of PSC‑PCM stacks, formulate high‑conductivity PCM composites with PCM Products Ltd, and apply machine‑learning surrogate optimisation to trade thermal buffering against mass. Prototypes, using perovskite cells from the University of Surrey, will be characterised in UEA’s vacuum and climatic chambers under simulated solar load, with flight‑representative thermal‑vacuum qualification accessed through Space East’s industry network (SSTL, SuperSharp Space).

You will graduate with rare expertise spanning thermofluids, energy materials and space systems, and a strong record of journal publications.

Entry Requirements: The standard minimum entry requirement is 2:1 in Mechanical Engineering, Aerospace Engineering, Energy Engineering, Applied Physics, or Materials Science.

Mode of Study: Full-time

Start Date: 1 October 2027

Additional Funding Information

This PhD project is in a competition for a Faculty of Science funded studentship. Funding is available to UK applicants and comprises ‘home’ tuition fees and an annual stipend for 3 years. The current UEA / institutional PhD stipend rate is £20,409 and will be subject to any agreed inflationary uplift for 2027/28.

信息有误?提交纠错