绞合绕组高保真电磁热建模博士研究员(能源转换方向)
PhD Studentship: : High-Fidelity Electromagnetic-Thermal Modelling of Litz Windings for Next-Generation Cryogenic Machines
原帖优先:申请材料、截止时间与资格以原帖和学校官方说明为准。
AI 中文速览
- 研究内容
- 本项目旨在开发低温下绞合绕组的高保真、计算高效的电磁-热模型,并据此推导出下一代高功率密度、超高效低温电机的设计准则。具体工作包括:扩展内部解析电磁模型、结合热求解器构建双向耦合框架、通过实验与仿真验证框架,并利用其优化绕组设计。
- 申请条件
- 申请人应拥有或预计获得电气、电子、机械工程、物理学或相关学科的至少二等一级荣誉学士学位或硕士学位(或国际同等学历)。具备电机设计、电磁场、有限元分析、热管理或编程(如MATLAB、Python)经验者优先,但非必须。
- 待遇
- 提供3.5年期全额资助,涵盖学费以及每年按UKRI标准发放的免税生活补助(2026/27年度为21,805英镑),且生活补助预计每年会增加。起始时间灵活,但希望尽快入职。
- 申请方式
- 原文未说明具体的申请方式、提交语言、文件格式或截止日期跳转地址。
由 gemini-2.5-flash-lite 生成,博士岗判定置信度 100%。
岗位信息
- 截止
- (Europe/London) 剩 78 天
- 学科
- 能源
- 合同类型
- 雇佣合同
- 原文薪资
- GBP 21,805 / 年(税前)
- 税后月薪(估)
- ¥13,700;房租后 ¥5,400
- 估算假设
- 单身、无子女、雇佣合同的粗略估算,以学校 offer 为准;扣除率 18%;汇率日期 2026-10-01
- 原帖发布
- 本站收录
- 内容更新
- 来源
- jobs.ac.uk(英国博士项目及学术招聘) · 最近核对 2026-11-22
- 详情核验
判定依据(原文摘录)
- 这是一项为期3.5年的全额资助博士培养机会
This 3.5-year PhD project is fully funded
- 工作语言为英语(通过全英文招聘信息及博士生要求体现)
This project suits a motivated candidate with a background in electrical, electronic or mechanical engineering, physics or a related discipline
- 要求申请者具备至少二等一级荣誉学位或硕士学位,不接受仅本科直接申请
Applicants should have, or expect to achieve, at least a 2.1 honours degree or a master’s (or international equivalent)
原文
This 3.5-year PhD project is fully funded; students who are eligible to pay tuition fees at the Home rate are eligible to apply. The successful candidate will receive an annual tax-free stipend set at the UKRI rate (£21,805 for 2026/27) and tuition fees will be paid. We expect the stipend to increase each year. The start date is flexible but we are looking for someone to start as soon as possible.
Transport electrification is central to energy security and net zero. Electrical machines lie at its heart, providing propulsion across road, rail and maritime transport. In mass- and volume-constrained applications such as aerospace, these machines must become substantially more power-dense and efficient, a leap that calls for innovative technologies rather than incremental refinement.
Cryogenically cooled machines offer one of the most promising routes. At extremely low temperatures (around 20 K), the electrical resistance of high-purity aluminium and copper falls by up to a hundredfold, allowing windings to carry far higher currents with drastically reduced DC losses. Built from readily available materials, these “hyperconducting” windings offer a practical path to step-change performance.
However, this benefit comes at a cost. The same reduction in resistance strongly amplifies induced eddy currents, making AC losses a major concern. Litz windings, with thousands of fine, 3D-transposed strands, can mitigate these losses, but at cryogenic temperatures the losses become highly sensitive to temperature. Conductor resistance can change several-fold over a few tens of kelvin, while low heat capacity means even small losses cause significant temperature rises. Losses and temperature are therefore tightly coupled, making accurate loss prediction and assessment of thermal stability both critical and highly challenging.
This PhD project will tackle this challenge by developing high-fidelity, computationally efficient electromagnetic–thermal models of Litz windings at cryogenic temperatures, and using them to derive design guidelines for next-generation power-dense cryogenic machines with ultra-high-efficiencies.
You will:
• extend established in-house analytical electromagnetic models to practical Litz windings, using reduced-order and data-driven AI methods for rapid, accurate loss prediction, verified against finite element simulations;
• integrate these models with an existing thermal solver into a two-way coupled electromagnetic–thermal framework;
• validate the framework through simulation and experiments on Litz winding samples, using an existing cryogenic test facility;
• use the validated framework to understand the coupled behaviour, identify key design factors and optimise winding designs.
You will join the Energy Conversion group in the Department of Electrical and Electronic Engineering, with weekly supervision from a team with complementary electromagnetic and thermal expertise. You will have access to established models, dedicated simulation software and cryogenic test facilities, so you will build on a solid foundation rather than starting from scratch. Training will cover electrical machine fundamentals, analytical and finite element modelling, data-driven methods, programming and cryogenic testing, alongside the University’s doctoral skills training.
This project suits a motivated candidate with a background in electrical, electronic or mechanical engineering, physics or a related discipline, who enjoys combining theory, simulation and experiments. Experience in electrical machine design, electromagnetic fields, finite element analysis, thermal management or programming (e.g. MATLAB, Python) is desirable but not essential.
Applicants should have, or expect to achieve, at least a 2.1 honours degree or a master’s (or international equivalent) in a relevant science or engineering related discipline. £21,805 annual tax-free stipend and tuition fees will be paid